Showing 1–24 of 29 results
-
-
Curtains & Roller Shutters (1)
-
IR Blaster (1)
-
Irrigation (2)
-
Light (3)
-
Relay (4)
-
Scene (2)
-
Sensor Nodes (8)
-
Sirens (1)
-
Dragino LSN50-v2 Lorawan Sensor Node
*STM32L072* MCU
*SX1276/78 LoRa Wireless Modem
*I2C,LPUSART1,USB
*18 x Digital I/Os
*2 x 12bit ADC; 1 x 12bit DAC
*LoRaWAN 1.0.2 Specification
*IP68 Waterproof Enclosure
*Ultra Low Power consumption
*AT Commands to setup parameters
*4000mAh or 8000mAh Battery for Long term use -
Dragino LT-22222-L Lorawan Input/output controller
*LoRaWAN Class A & Class C protocol
*Optional Customized LoRa Protocol
*Frequency Bands: CN470/EU433/KR920/
US915/EU868/AS923/AU915
*AT Commands to change parameters
*Firmware upgradable via program port
* 2 x Digital Input
* 2 x Digital Output
* 2 x Relay Output (5A@250VAC / 30VDC)
* 2 x 0~20mA Analog Input (res:0.01mA)
* 2 x 0~30V Analog Input (res:0.01v)
* Power Input 0~24V -
Dragino WSC1-L MPU for Weather Station
*LoRaWAN v1.0.3 Class A protocol.
*RS485 / Modbus protocol
*AT Commands to change parameters
*Remote configure parameters via LoRaWAN Downlink
*Firmware upgradable via program port
*Powered by external 12v battery
*Back up rechargeable 1000mAh battery
*IP Rating: IP65
*Support default sensors or 3rd party RS485 sensors
*Wall Attachable. -
Milesight UC-300 IoT Controller
1 * RS232 + 1 * RS485
4 * Digital Input
2 * Digital Output
2 * 4 ~ 20 mA Analog Input
2 * 0 ~ 10 V Analog Input
2 * PT100 RTD Analog Input -
Milesight UC-501 Controller Soler Panel
Solar Panel Power (Applicable to UC501)
Rated Power: 5W
Max Power: 10.12W / Max Current: 0.28A
Operating: -40°C ~ 85°C
Weight: 0.6kg -
Milesight UC-501 IoT Controller
Interface 1: 2 * GPIO
1 * RS232 / RS485 (Switchable)
1 * 3.3V Output
1 * 5/9/12 V Output Switchable
Interface 2:
2 * Analog Input
1 * 3.3V Output
1 * 5/9/12V Output Switchable
Power Option: Solar Powered with 2 * 2550mAh Chargeable Battery and 5-24VDC
IP67 Rated -
Milesight UC-511 Solenoid Valve Controller
2 * Solenoid Interfaces
1 * Pulse Interface (Support 2 Pulse Meters) Power Option: 2 * 2550mAh Chargeable Battery with Solar Panel IP67 Rated -
Milesight WS101 Smart Button
1650 mAh Li-SOCL2 Battery
Advanced Features: LoRa D2D Controller
NFC Enabled
IP30 Rated
Button: 1 * External Button + 1 * Reset Button (Internal)
Buzzer: Support
PN: SOS / Scene
Example: single press (light), double press (AC), Long Press (SOS) -
Milesight WS136 Smart Scene Panel D2D Controller
2 * 590 mAh CR2450 Lithium Coin Cell Batteries
Advanced Features: LoRa D2D Controller
NFC Enabled
IP30 Rated
Upto 6 Scenes Buttons
Dual Protocol Operation
Each button of WS156/WS136 can work in LoRaWAN® or Milesight D2D protocol separately.
Multiple Scenes
Customizable Display
One-to-Many Control
Milesight D2D Communication -
Milesight WS156 Smart Scene Panel D2D Controller
2 * 590 mAh CR2450 Lithium Coin Cell Batteries
Advanced Features: LoRa D2D Controller
NFC Enabled, E INK Display
IP30 Rated
Upto 6 Scenes Buttons
Dual Protocol Operation
Each button of WS156/WS136 can work in LoRaWAN® or Milesight D2D protocol separately.
Multiple Scenes
Customizable Display
One-to-Many Control
Milesight D2D Communication -
Milesight WS502/WS501 Smart Switch
189د.إ inc. VATNFC Enabled
Schedule Switch & Switch Lock
Operating Voltage: 100 ~ 250 VAC, 50 ~ 60 Hz Measurement: Voltage (VAC), Current (mA), Power Factor (%), Power Consumption (kWh), Power (W)
Support Overload Protection
Support Multicast Feature to Control Switches in Bulk
Advanced Features: LoRa D2D Controller & LoRa D2D Agent
Remote on/off, timed on/off
2-Gang -
Netvox R211- Wireless IR Blaster
Netvox Wireless IR Blaster can be used for IR learning and application. After IR learning, R211 can send the infrared control signal to corresponded electric devices. R211 can receive infrared signal from other infrared device and process predefined action, ex. controlling other LoRa devices.
-
Netvox R312A – Wireless Emergency Button
The R312A is an emergency button switch device that detects the closing or opening signal of the emergency button switch and sends an alarm signal to the gateway for processing. It uses the SX1276 wireless communication module.
-
Netvox R313M – Wireless Door Bell Button
R313M is a wireless doorbell control device which can detect whether the wireless doorbell is triggered and send the doorbell status to the gateway.
-
Netvox R313MA – Wireless Emergency Button
The R313MA is a wireless emergency button that detects after pressing the emergency button and sends an alarm message to the gateway.
It uses the SX1276 wireless communication module. -
Netvox R602A – LoRa Siren
R602A is a smart wireless alarm that can communicate with other devices through a wireless network. It has a high-decibel speaker and high-brightness LED which can realize sound and light alarms. It adopts SX1276 wireless communication module.
-
Netvox R718IJK-Wireless Multi-Sensor Interface for 0-24V ADC, Dry Contact and 4-20mA Sensors
588د.إ inc. VATThis device is used for detecting 4mA-20mA signal, 0-24V DC ADC samples and dry contact features which employs SX1276 wireless communication module .
R718IJK can detect 4mA-20mA signal, 0-24V DC ADC sampling signal and dry contact input signal, and send the detection signal data to the gateway, and display the collected data in the monitoring platform.
-
Netvox R718PC-Wireless RS485 Serial Port Transmission
651د.إ inc. VATThis device only supports RS485 serial port transparent transmission (RS485sensor power supply is DC12V), which can send read commands to the sensor supporting RS-485 protocol according to the configured cycle time. The information of sensor reply will be directly reported to the gateway, and displayed in the interface on the gateway. It uses SX1276 wireless communication.
-
Netvox R718T – Wireless Push Button Interface
R718T is a Wireless Push Button Interface.
It can connect with an external push button and detect whether the external button is pressed. -
Netvox R718T2 – Wireless 2-Input Push Button Interface
The Wireless 2-Input Push Button Interface allows a notification signal to be sent when connected
push button is pushed. When someone is in danger and needs emergency assistance, press the
emergency push button device; R718T2 immediately sends an alarm message to the gateway. -
Netvox R718TB – Wireless Push Button
R718TB is a push button which detects the signal of the device.
-
Netvox R831A-Wireless Multifunctional Control Box
R831A is a device used to control the switch and is mainly used for the
switch control of the strong electric motor control box. -
Netvox R831B-Wireless Multifunctional Control Box
R831B is a device used to control the switch and is mainly used for the
switch control of the light electric motor control box. -
Netvox R831C-Wireless Multifunctional Control Box
R831C have three relay switches(output) and three dry contacts(input).
R831C can control 3 relay devices through external dry contact button or downlink commands.
End of content
End of content