Showing all 29 results
-
Netvox R718PC-Wireless RS485 Serial Port Transmission
د.إ620.00Quick ViewThis device only supports RS485 serial port transparent transmission (RS485sensor power supply is DC12V), which can send read commands to the sensor supporting RS-485 protocol according to the configured cycle time. The information of sensor reply will be directly reported to the gateway, and displayed in the interface on the gateway. It uses SX1276 wireless communication.
-
Netvox R718IJK-Wireless Multi-Sensor Interface for 0-24V ADC, Dry Contact and 4-20mA Sensors
د.إ560.00Quick ViewThis device is used for detecting 4mA-20mA signal, 0-24V DC ADC samples and dry contact features which employs SX1276 wireless communication module .
R718IJK can detect 4mA-20mA signal, 0-24V DC ADC sampling signal and dry contact input signal, and send the detection signal data to the gateway, and display the collected data in the monitoring platform.
-
Milesight WS502/WS501 Smart Switch
د.إ180.00Quick ViewNFC Enabled
Schedule Switch & Switch Lock
Operating Voltage: 100 ~ 250 VAC, 50 ~ 60 Hz Measurement: Voltage (VAC), Current (mA), Power Factor (%), Power Consumption (kWh), Power (W)
Support Overload Protection
Support Multicast Feature to Control Switches in Bulk
Advanced Features: LoRa D2D Controller & LoRa D2D Agent
Remote on/off, timed on/off
2-Gang -
Netvox RA10-Wireless LoRa Valve keeper
Quick ViewThe valve disconnector RA10 is a wireless smart device for home security and automatic irrigation. It uses SX1276 wireless communication. Join RA10 to the gateway and realizes the operation of automatically opening and closing the valve through the instructions of other devices in the network. It can also use the manual switch function.
-
Netvox R211- Wireless IR Blaster
Quick ViewNetvox Wireless IR Blaster can be used for IR learning and application. After IR learning, R211 can send the infrared control signal to corresponded electric devices. R211 can receive infrared signal from other infrared device and process predefined action, ex. controlling other LoRa devices.
-
Netvox RB02B – Wireless 2-Gang Push Button
Quick ViewRB02B is a high-reliability wireless controlling terminal device.
It has the characteristics of low power consumption during the standby status, and applying the SX1276
wireless communication module. RB02B is a long-distance smart wall switch which is a Class A device of
netvox based on the LoRaWAN open protocol. According to the needs of different applications, press the
trigger button of RB02B. The device immediately sends trigger information to the gateway. -
Netvox RB02C -Wireless 3-Gang Push Button
Quick ViewRB02C is a high-reliability wireless controlling terminal device for smart homes.
It has the characteristics of standby, low power consumption, and applying the SX1276 wireless communication module. RB02C has three buttons which can control three switch devices. -
Netvox RB02I – Wireless Emergency Push Button
Quick ViewThe RB02I product is a wireless control terminal device for smart homes and high reliability. It features low standby power consumption and is fully compliant with the LoRaWAN™ protocol standard. RB02I is an emergency alarm triggering device, with a silicone waterproof cover.
-
Netvox R718T2 – Wireless 2-Input Push Button Interface
Quick ViewThe Wireless 2-Input Push Button Interface allows a notification signal to be sent when connected
push button is pushed. When someone is in danger and needs emergency assistance, press the
emergency push button device; R718T2 immediately sends an alarm message to the gateway. -
Milesight WS156 Smart Scene Panel D2D Controller
Quick View2 * 590 mAh CR2450 Lithium Coin Cell Batteries
Advanced Features: LoRa D2D Controller
NFC Enabled, E INK Display
IP30 Rated
Upto 6 Scenes Buttons
Dual Protocol Operation
Each button of WS156/WS136 can work in LoRaWAN® or Milesight D2D protocol separately.
Multiple Scenes
Customizable Display
One-to-Many Control
Milesight D2D Communication -
Milesight WS136 Smart Scene Panel D2D Controller
Quick View2 * 590 mAh CR2450 Lithium Coin Cell Batteries
Advanced Features: LoRa D2D Controller
NFC Enabled
IP30 Rated
Upto 6 Scenes Buttons
Dual Protocol Operation
Each button of WS156/WS136 can work in LoRaWAN® or Milesight D2D protocol separately.
Multiple Scenes
Customizable Display
One-to-Many Control
Milesight D2D Communication -
Dragino WSC1-L MPU for Weather Station
Quick View*LoRaWAN v1.0.3 Class A protocol.
*RS485 / Modbus protocol
*AT Commands to change parameters
*Remote configure parameters via LoRaWAN Downlink
*Firmware upgradable via program port
*Powered by external 12v battery
*Back up rechargeable 1000mAh battery
*IP Rating: IP65
*Support default sensors or 3rd party RS485 sensors
*Wall Attachable. -
Dragino LSN50-v2 Lorawan Sensor Node
Quick View*STM32L072* MCU
*SX1276/78 LoRa Wireless Modem
*I2C,LPUSART1,USB
*18 x Digital I/Os
*2 x 12bit ADC; 1 x 12bit DAC
*LoRaWAN 1.0.2 Specification
*IP68 Waterproof Enclosure
*Ultra Low Power consumption
*AT Commands to setup parameters
*4000mAh or 8000mAh Battery for Long term use -
Dragino LT-22222-L Lorawan Input/output controller
Quick View*LoRaWAN Class A & Class C protocol
*Optional Customized LoRa Protocol
*Frequency Bands: CN470/EU433/KR920/
US915/EU868/AS923/AU915
*AT Commands to change parameters
*Firmware upgradable via program port
* 2 x Digital Input
* 2 x Digital Output
* 2 x Relay Output (5A@250VAC / 30VDC)
* 2 x 0~20mA Analog Input (res:0.01mA)
* 2 x 0~30V Analog Input (res:0.01v)
* Power Input 0~24V -
Milesight UC-501 IoT Controller
Quick ViewInterface 1: 2 * GPIO
1 * RS232 / RS485 (Switchable)
1 * 3.3V Output
1 * 5/9/12 V Output Switchable
Interface 2:
2 * Analog Input
1 * 3.3V Output
1 * 5/9/12V Output Switchable
Power Option: Solar Powered with 2 * 2550mAh Chargeable Battery and 5-24VDC
IP67 Rated
