Showing all 29 results
-
Netvox R718NL363-Wireless Light Sensor and 3-Phase Current Meter with 3x630A Clamp-On CT
د.إ1,280.00Quick ViewThe NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x630A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718NL325-Wireless Light Sensor and 3-Phase Current Meter with 3x250A Clamp-On CT
د.إ1,085.00Quick ViewThe NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x250A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718N325-Wireless 3-Phase Current Meter with 3 x 250A Clamp-On CT
د.إ1,085.00Quick ViewR718N325 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.
-
Netvox R718NL315-Wireless Light Sensor and 3-Phase Current Meter with 3x150A Clamp-On CT
د.إ1,085.00Quick ViewThe NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x150A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718N37-Wireless 3-Phase Current Meter with 3 x 75A Clamp-On CT
د.إ899.00Quick ViewR718N37 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
-
Netvox R718NL163-Wireless Light Sensor and 1-Phase Current Meter with 1x630A Clamp-On CT
د.إ795.00Quick ViewThe NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x630A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718NL37-Wireless Light Sensor and 3-Phase Current Meter with 3x75A Clamp-On CT
د.إ795.00Quick ViewR718NL37 is used to detect three-phase electrical input current and ambient light intensity detection.
It adopts the clamp-on current transformer, which can be conveniently connected tothe measuring device. -
Netvox R718NL125-Wireless Light Sensor and 1-Phase Current Meter with 1x250A Clamp-On CT
د.إ750.00Quick ViewThe NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x250A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718NL115-Wireless Light Sensor and 1-Phase Current Meter with 1x150A Clamp-On CT
د.إ700.00Quick ViewThe NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x150A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718N163-Wireless 1-Phase Current Meter with 1 x 630A Clamp-On CT
د.إ690.00Quick ViewThe device is powered by battery and obtains the load AC current value through the current
transformer. The device adopts the clamp-on current transformer, which can be conveniently
connected to the measuring device. -
Netvox R718NL17-Wireless Light Sensor and 1-Phase Current Meter with 1x75A Clamp-On CT
د.إ685.00Quick ViewThe NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x75A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718N125-Wireless 1-Phase Current Meter with 1 x 250A Clamp-On CT
د.إ655.00Quick ViewR718N125 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
-
Netvox R718N115-Wireless 1-Phase Current Meter with 1 x 150A Clamp-On CT
د.إ620.00Quick ViewR718N115 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
-
Netvox R718N17-Wireless 1-Phase Current Meter with 1 x 75A Clamp-On CT
د.إ595.00Quick ViewThe NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
-
Netvox R809A01-Wireless Plug-and-Play Power Outlet with Consumption Monitoring and Power Outage Detection
د.إ575.00Quick ViewThe R809A01 is a wireless power plug converter for indoor use. It can remotely control the output switch and detect the output power. It integrates the LoRa/FSK modulation communication wireless module SX1276, which can realize wireless remote control.
R809A01 has a 10A/230VAC output load capability and is primarily used to measure electrical power consumption and wireless switch control. R809A01 supports the wireless module to send a power off alarm signal to the gateway after power off -
Netvox R809A -Wireless Power Plug with Power Meter
د.إ565.00Quick ViewR809A is a Wireless Plug-and-Play Power Outlet with Consumption Monitoring for indoor use.
It can remotely control the output switch and detect the output power. It integrates the LoRa/FSK modulation communication wireless module SX1276 which can realize wireless remote control.
R809A has a 10A/230VAC output load capability and is primarily used to measure electrical power consumption and wireless switch control. -
Milesight WS502/WS501 Smart Switch
د.إ180.00Quick ViewNFC Enabled
Schedule Switch & Switch Lock
Operating Voltage: 100 ~ 250 VAC, 50 ~ 60 Hz Measurement: Voltage (VAC), Current (mA), Power Factor (%), Power Consumption (kWh), Power (W)
Support Overload Protection
Support Multicast Feature to Control Switches in Bulk
Advanced Features: LoRa D2D Controller & LoRa D2D Agent
Remote on/off, timed on/off
2-Gang -
Netvox R816B01-Wireless US Type Wall Socket with Power Meter
Quick ViewR816B01(wireless wall socket with energy consumption monitoring (US regulation)) for indoor use of intelligent electrical switch socket, which is suitable for US wall box installation, output socket applicable to U.S. regulation2pole or3pole plug with rated output load of15A/120V. R816B01has a wireless module with LoRa/FSKmodulation communication.The SX1276 can achieve wireless remote control and can control the single power output through internal relays, and detect the current, voltage, power, electrical energy and other electrical parameters of the equipment that receives its power supply. (Description: The top socket output is uncontrolled, the lower socket output is relay control output, and has the output power detection function. There are a relay control button and twoLEDs between the two sockets.)
-
Netvox R718NL13-Wireless Light Sensor and 1-Phase Current Meter with 1x30A Clamp-On CT
Quick ViewThe NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x30A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718N13-Wireless 1-Phase Current Meter with 1 x 30A Clamp-On CT
Quick ViewThe NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
-
Netvox R816B-Wireless US Type Wall Socket with Power Meter
Quick ViewR816B (wireless wall socket with energy consumption monitoring (US)) is a smart electrical switch socket for indoor use. It is suitable for US standard wall cassette installation. The output socket is suitable for US standard 2 or 3 pole plug; rated output load is 15A/120V.
R816B integrates LoRa/FSK modulation communication wireless module SX1276, which can realize wireless remote control. It can control the single-channel power output to be turned on and off through internal relay, and can detect the current, voltage, power, and electrical energy of the device connected to it.
(Note: the output of the upper socket is uncontrolled, the output of the lower socket is the relay control output, and the output power detection function is provided. There is a relay control button and two LED indicators between the two sockets.)
-
Netvox R718N360-Wireless 3-Phase Current Meter Interface
Quick ViewThe NETVOX wireless three-phase current interface which can detect the current can be connected with the different CTs by the user. The device is compatible with the LoRaWAN protocol and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer.
-
Netvox RB02B – Wireless 2-Gang Push Button
Quick ViewRB02B is a high-reliability wireless controlling terminal device.
It has the characteristics of low power consumption during the standby status, and applying the SX1276
wireless communication module. RB02B is a long-distance smart wall switch which is a Class A device of
netvox based on the LoRaWAN open protocol. According to the needs of different applications, press the
trigger button of RB02B. The device immediately sends trigger information to the gateway. -
Netvox RB02C -Wireless 3-Gang Push Button
Quick ViewRB02C is a high-reliability wireless controlling terminal device for smart homes.
It has the characteristics of standby, low power consumption, and applying the SX1276 wireless communication module. RB02C has three buttons which can control three switch devices. -
Milesight WS522 Smart Portable Socket
Quick ViewPlug and Play Advanced Features:
Schedule Switch / Button Lock / Overcurrent Protection /Alarm / Multicast / Power Outage Alert NFC Enabled
Socket & Plug Type: UK
Operating Voltage: 100 ~ 250 VAC, 50 ~ 60 Hz
Max Load Capacity: 10 A / 16 A (Optional), 250 VACMeasurement: Voltage(VAC), Current(A), Power Factor (%), Power Meter (kWh), Power (W)
