Showing 1–52 of 364 results
-
Netvox R718PA10 – Wireless Turbidity Sensor
د.إ5,285.00R718PA10 can detect the turbidity value and temperature of the solution. The body and the turbidity sensor are connected through the RS485 interface, and the detected data is transmitted to other devices through the wireless network for display.
-
Netvox R72624 – Wireless Outdoor Noise, Temperature, Humidity Sensor with a Solar Panel
د.إ3,775.00R72624 has the built-in noise detector and the built-in temperature and humidity sensor that can
detect the value of noise, temperature and humidity and transmit the detected data to other device
via the wireless network for display. -
Netvox R72615 – Wireless Outdoor CO2, Temperature, Humidity Sensor with Solar Panel
د.إ2,740.00The R72615 is equipped with a temperature and humidity sensor that detects and transmits ambient
temperature and humidity data. It is a wireless communication method that uses the SX1276 wireless
communication module. The R72615 has a CO2 sensor that detects the concentration of CO2 in the air. -
Netvox R718PA8-Wireless PH Sensor
د.إ2,105.00R718PA8 is a wireless communication device for pH value of acid, alkali, and salt solution. R718PA8 can detect the pH value and temperature of the solution. The body and the pH sensor are connected through the RS485 interface, and the detected data is transmitted to other devices through the wireless network for display.
-
Netvox RA0724 – Wireless Noise, Temperature, Humidity Sensor
د.إ2,085.00RA0724 is a Wireless Noise & Temperature & Humidity Sensor. It can detect the value of noise, temperature, and humidity. The device will transmit the detected data to other devices via the wireless network for display. It adopts SX1276 wireless communication module.
-
Netvox R718PA3 – Wireless O3 Sensor
د.إ1,760.00The R718PA3 is a wireless communication device that detects O3 concentration in ambient air. The body and the O3 sensor are connected through the RS485 interface, and the detected data is transmitted to other devices through the wireless network .
-
Netvox RA0711 – Wireless Liquid Level Sensor
د.إ1,555.00The RA0711 is a wireless communication device that detects the liquid depth.
The RA0711 can detect the depth of the liquid in the container.
*Different types of liquid have different requirements for sensors, so the sensor needs to be selected according to the type of liquid. -
Netvox R718NL363-Wireless Light Sensor and 3-Phase Current Meter with 3x630A Clamp-On CT
د.إ1,280.00The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x630A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R72616A – Wireless PM2.5, Temperature, Humidity Sensor
د.إ1,225.00R72616A with temperature and humidity sensor can detect and send the temperature and humidity data of the environment. The device is in line with the LoRa protocol standard. R72616A with PM2.5 dust sensor can be used to obtain the concentration of suspended particulates in air per unit volume.
-
Netvox R718NL325-Wireless Light Sensor and 3-Phase Current Meter with 3x250A Clamp-On CT
د.إ1,085.00The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x250A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718N325-Wireless 3-Phase Current Meter with 3 x 250A Clamp-On CT
د.إ1,085.00R718N325 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.
-
Netvox R718NL315-Wireless Light Sensor and 3-Phase Current Meter with 3x150A Clamp-On CT
د.إ1,085.00The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x150A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox RA0716 – Wireless PM2.5, Temperature, Humidity Sensor
د.إ990.00RA0716 is equipped with the external temperature and humidity sensor which can detect and send the data of the ambient temperature and humidity.It adopts the wireless communication method and conforms to the LoRa protocol standard. RA0716 is equipped with the PM2.5 dust sensor which can be used to detect the concentration of suspended particles in the air per unit volume.
-
Netvox R718N37-Wireless 3-Phase Current Meter with 3 x 75A Clamp-On CT
د.إ899.00R718N37 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
-
Netvox R718NL163-Wireless Light Sensor and 1-Phase Current Meter with 1x630A Clamp-On CT
د.إ795.00The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x630A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718NL37-Wireless Light Sensor and 3-Phase Current Meter with 3x75A Clamp-On CT
د.إ795.00R718NL37 is used to detect three-phase electrical input current and ambient light intensity detection.
It adopts the clamp-on current transformer, which can be conveniently connected tothe measuring device. -
Netvox R718NL125-Wireless Light Sensor and 1-Phase Current Meter with 1x250A Clamp-On CT
د.إ750.00The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x250A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Edge Helium Mining RF Amplifier 868mhz – 17rx & 6tx
Original price was: د.إ790.00.د.إ740.00Current price is: د.إ740.00.· Built-in Saw Filter in both Tx and Rx Link
· With 868MHz amplifier up to 4X more range
· Ultra-low noise figure 2.0dB
· 863-870MHz Full Band Lora Applications
· DC input:RF cable and 2.5*0.7mm DC socketKit includes: 1. Bias Tee 2. Amplifier 3. Power Adaptor
-
Netvox R718NL115-Wireless Light Sensor and 1-Phase Current Meter with 1x150A Clamp-On CT
د.إ700.00The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x150A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718N163-Wireless 1-Phase Current Meter with 1 x 630A Clamp-On CT
د.إ690.00The device is powered by battery and obtains the load AC current value through the current
transformer. The device adopts the clamp-on current transformer, which can be conveniently
connected to the measuring device. -
Netvox R718NL17-Wireless Light Sensor and 1-Phase Current Meter with 1x75A Clamp-On CT
د.إ685.00The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x75A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. -
Netvox R718N125-Wireless 1-Phase Current Meter with 1 x 250A Clamp-On CT
د.إ655.00R718N125 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
-
Netvox R718A01 – Wireless Temperature and Humidity Sensor for Low Temperature Environment
د.إ625.00R718A01 can detect the temperature and humidity of the air, with the function of temperature
and humidity data buffer, and transmit the detected data to the gateway for display through the
wireless network. -
Netvox R718VA-Wireless Capacitive Proximity Sensor
د.إ620.00R718VA is a device to detect the status of toilet water, hand sanitizer level, presence or absence of tissue. This device is connected with a non-contact capacitive sensor can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current water level of positions mounted, or the presence or absence of liquid soap or toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module.
-
Netvox R718VB-Wireless Capacitive Proximity Sensor
د.إ620.00R718VB can detect the toilet water level, hand sanitizer level, presence or absence of toilet paper, it may also be applied to non-metallic pipes (pipe diameter D≥11MM) liquid level detector. This device is connected with a non-contact capacitive sensor which can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current position of liquid level, or the presence or absence of liquid soap, toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module .
-
Netvox R718PC-Wireless RS485 Serial Port Transmission
د.إ620.00This device only supports RS485 serial port transparent transmission (RS485sensor power supply is DC12V), which can send read commands to the sensor supporting RS-485 protocol according to the configured cycle time. The information of sensor reply will be directly reported to the gateway, and displayed in the interface on the gateway. It uses SX1276 wireless communication.
-
Netvox R718PDA-Wireless RS232 Adapter
د.إ620.00This device only supports RS232 serial port transparent transmission (RS232sensor power supply is DC12V), which can send read commands to the sensor supporting RS-232 protocol according to the configured cycle time. The information of sensor reply will be directly reported to the gateway, and displayed in the interface on the gateway. It uses SX1276 wireless communication.
-
Netvox R718N115-Wireless 1-Phase Current Meter with 1 x 150A Clamp-On CT
د.إ620.00R718N115 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
-
Netvox R718N17-Wireless 1-Phase Current Meter with 1 x 75A Clamp-On CT
د.إ595.00The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
-
Netvox R720B-Wireless Temperature and Humidity Sensor with Activity Detection Sensor
د.إ590.00The R720B is a wireless communication device that detects ambient air temperature and humidity. The R720B also detects if it is being moved. The R720B can transmit the detected data to other devices via the wireless network, using the SX1276 wireless communication module.
-
Netvox R718PQ – Wireless Short-Range Occupancy Sensor
د.إ590.00The R718PQ is a wireless communication device that detects toilet occupancy. The device has a built-in PIR sensor (pyroelectric human body infrared sensor) to detect whether someone has entered; the detected data is transmitted to other devices through the wireless network, and the SX1276 wireless communication module is used.
-
Netvox R718AD – Wireless Temperature Sensor
د.إ585.00The R718AD is a wireless communication device for detecting temperature. The temperature sensor probe contacts an object to detect the temperature, and the detected data is transmitted to other devices through a wireless network. The SX1276 wireless communication module is used.
-
Netvox R809A01-Wireless Plug-and-Play Power Outlet with Consumption Monitoring and Power Outage Detection
د.إ575.00The R809A01 is a wireless power plug converter for indoor use. It can remotely control the output switch and detect the output power. It integrates the LoRa/FSK modulation communication wireless module SX1276, which can realize wireless remote control.
R809A01 has a 10A/230VAC output load capability and is primarily used to measure electrical power consumption and wireless switch control. R809A01 supports the wireless module to send a power off alarm signal to the gateway after power off -
Netvox R809A -Wireless Power Plug with Power Meter
د.إ565.00R809A is a Wireless Plug-and-Play Power Outlet with Consumption Monitoring for indoor use.
It can remotely control the output switch and detect the output power. It integrates the LoRa/FSK modulation communication wireless module SX1276 which can realize wireless remote control.
R809A has a 10A/230VAC output load capability and is primarily used to measure electrical power consumption and wireless switch control. -
Netvox R718IJK-Wireless Multi-Sensor Interface for 0-24V ADC, Dry Contact and 4-20mA Sensors
د.إ560.00This device is used for detecting 4mA-20mA signal, 0-24V DC ADC samples and dry contact features which employs SX1276 wireless communication module .
R718IJK can detect 4mA-20mA signal, 0-24V DC ADC sampling signal and dry contact input signal, and send the detection signal data to the gateway, and display the collected data in the monitoring platform.
-
Netvox R718KA2 -Wireless 2-Input-mA Current Meter Interface, 4~20mA
د.إ555.00The Wireless 4-20mA DC Current Meter is designed to offer a large selection of easy-to-use current 4-20mA data loggers for load monitoring. The wireless communication is compatible with LoRaWAN™ protocol (ClassA).