IoT Products
Showing 241–264 of 364 results
-
Netvox R718PB13 – Wireless Soil Moisture Sensor
The device is a wireless communication device that detects the moisture content of the soil. It can detect the moisture content of the soil and transmit the detected data to other devices through the wireless network. It uses the SX1276 wireless communication method.
-
Netvox R718PB15 – Wireless Soil Moisture, Temperature and Electrical Conductivity Sensor
The device is a wireless communication device that detects soil temperature and moisture content and soil conductivity, and transmits the detected data to other devices through a wireless network. The SX1276 wireless communication method is adopted .
-
Netvox R718PB15A – Wireless Soil Moisture, Temperature, Electrical Conductivity Sensor
The device is a wireless communication device that detects soil temperature and soil moisture and soil electrical conductivity, and transmits the detected data to other devices through a wireless network. The SX1276 wireless communication method is adopted.
-
Netvox R718PC-Wireless RS485 Serial Port Transmission
651د.إ inc. VATThis device only supports RS485 serial port transparent transmission (RS485sensor power supply is DC12V), which can send read commands to the sensor supporting RS-485 protocol according to the configured cycle time. The information of sensor reply will be directly reported to the gateway, and displayed in the interface on the gateway. It uses SX1276 wireless communication.
-
Netvox R718PDA-Wireless RS232 Adapter
651د.إ inc. VATThis device only supports RS232 serial port transparent transmission (RS232sensor power supply is DC12V), which can send read commands to the sensor supporting RS-232 protocol according to the configured cycle time. The information of sensor reply will be directly reported to the gateway, and displayed in the interface on the gateway. It uses SX1276 wireless communication.
-
Netvox R718PE – Wireless Top Mounted Ultrasonic Liquid Level Sensor
R718PE is a wireless communication device that uses ultrasound to detect the distance between the device and the detected object. The medium the device detects is the air, so the detected object can be any liquid or solid that has a flat and horizontal surface, water level for example.
The main body and the sensor of R718PE communicates via the UART serial port, and the detected data can be transmitted via LoRa communication. -
Netvox R718PE01 – Wireless Top-Mounted Ultrasonic Level Sensor
R718PE01 is a wireless communication device that uses ultrasonic waves to measure
distance. The ultrasonic transmission medium of R718PE01 ultrasonic sensor is air, so the
measured object can be any liquid or solid with a certain plane, which can be used for liquid
level detection, material level detection, etc. The detection angle of R718PE01 is about 20 °,
which has a stronger transmission signal and is more suitable for the detection of objects such
as grain heaps and sand. -
Netvox R718PG – Wireless Light Sensor
504د.إ inc. VATThe device has a built-in light sensor that can be used for ambient light intensity detection. It adopts the SX1276 wireless communication module. R718PG detects the ambient light intensity value and joins to the gateway.
-
Netvox R718PQ – Wireless Short-Range Occupancy Sensor
619.50د.إ inc. VATThe R718PQ is a wireless communication device that detects toilet occupancy. The device has a built-in PIR sensor (pyroelectric human body infrared sensor) to detect whether someone has entered; the detected data is transmitted to other devices through the wireless network, and the SX1276 wireless communication module is used.
-
Netvox R718PQA – Wireless Toilet Occupancy Sensor
The R718PQA is a wireless communication device that detects toilet occupancy. The device is equipped with a reed switch sensor for detecting the switch status of the door; a built-in PIR sensor (pyroelectric human body infrared sensor) to detect whether someone is in the toilet. Two detections are established at the same time to determine if the toilet is occupied. Through the wireless network, the detected data is transmitted to other devices for display, which uses the SX1276 wireless communication module.
-
Netvox R718T – Wireless Push Button Interface
R718T is a Wireless Push Button Interface.
It can connect with an external push button and detect whether the external button is pressed. -
Netvox R718T2 – Wireless 2-Input Push Button Interface
The Wireless 2-Input Push Button Interface allows a notification signal to be sent when connected
push button is pushed. When someone is in danger and needs emergency assistance, press the
emergency push button device; R718T2 immediately sends an alarm message to the gateway. -
Netvox R718TB – Wireless Push Button
R718TB is a push button which detects the signal of the device.
-
Netvox R718VA-Wireless Capacitive Proximity Sensor
651د.إ inc. VATR718VA is a device to detect the status of toilet water, hand sanitizer level, presence or absence of tissue. This device is connected with a non-contact capacitive sensor can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current water level of positions mounted, or the presence or absence of liquid soap or toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module.
-
Netvox R718VB-Wireless Capacitive Proximity Sensor
651د.إ inc. VATR718VB can detect the toilet water level, hand sanitizer level, presence or absence of toilet paper, it may also be applied to non-metallic pipes (pipe diameter D≥11MM) liquid level detector. This device is connected with a non-contact capacitive sensor which can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current position of liquid level, or the presence or absence of liquid soap, toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module .
-
Netvox R718WA – Wireless Water Leak Detector
The device is a LoRaWAN™ device compatible with LoRaWAN™ protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway.
R718WA carries 1 water leak sensor.
It uses SX1276 wireless communication module.
-
Netvox R718WA2 – Wireless 2-Gang Water Leak Detector
The device is a LoRaWAN™ device compatible with LoRaWAN™ protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway.
R718WA2 carries 2 water leak sensors.It uses SX1276 wireless communication module.
-
Netvox R718WAA – Wireless Water Leakage, Temperature & Humidity Sensor
This device is used for water leakage detection and environmental temperature and humidity detection.
When the water leakage sensor detects water leakage, it will send an alarm message to the gateway. -
Netvox R718WB – Wireless Water Leak Detector with Rope Sensor
R718WB is a non-locating leak detection wireless communication device. R718WB can detect the leak status through an external dual-core non-positioning water rope sensor, and send the detected data to data center through the wireless network.
-
Netvox R718WB2 – Wireless Water Two Gang Leak Detector with Rope Sensor
The device is a LoRaWAN™ device compatible with LoRaWAN™ protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway.
R718WB2 carries 2 water rope sensors.
It uses SX1276 wireless communication module.
-
Netvox R718WBA – Wireless Temperature and Humidity Sensor & Water Leakage
The R718WBA is a wireless communication device that detects ambient air temperature and humidity and non-locating leak detection. The R718WBA detects the temperature and humidity of the air. At the same time, it detects the presence or absence of water leakage through the 2-core non-locating leak detection sensor line, and transmits the detected data to the gateway through the wireless network. The SX1276 wireless communication module is used.
-
Netvox R718X-Wireless Ultrasonic Distance Sensor
R718X is a wireless device that detect distance by ultrasonic ranging sensor.
R718X also equips an NTC temperature sensor and will send alarm message while detecting abnormal temperature. -
Netvox R718Y – Wireless Differential Pressure and Temperature Sensor
R718Y is a wireless communication device which can detect the pressure difference. It will transmit the detected data to other devices for display through the wireless network.
-
Netvox R719A-Wireless Surface-Mounted Parking Sensor
R719A is a smart parking vehicle detection sensor. It can be used to detect the presence or absence of parking vehicles in the parking space. It uses the SX1276 wireless communication module and adds vehicle status information to the gateway and displays the collected data in the gateway
End of content
End of content