Showing 193–216 of 299 results

  • Netvox R718PA4 - Wireless H2S Sensor

    Netvox R718PA4 – Wireless H2S Sensor

    0 out of 5

    The R718PA4 is a wireless communication device that detects H2S content in ambient air. R718PA4 detectable air H2S concentration levels. The main unit and H2S sensor are connected with RS485 interface, and the detected data to the other equipment shown via a wireless network which employs compliance Lora (TM) wireless communication protocol standards.

    Read moreLoading Done
  • Netvox R718PA5 - Wireless NO2 Sensor

    Netvox R718PA5 – Wireless NO2 Sensor

    0 out of 5

    The R718PA5 is a wireless communication device that detects NO2 concentration in ambient air. The main unit communicates with the NO2 sensor via the RS485 connection interface. The collected data will be shown in the other devices such as a third party platform through wireless network compatible with LoRaWAN protocol.

    Read moreLoading Done
  • Netvox R718PA6 - Wireless SO2 Sensor

    Netvox R718PA6 – Wireless SO2 Sensor

    0 out of 5

    The R718PA6 is a wireless communication device that detects SO2 concentration in ambient air. The main unit and SO2 sensor communicate via the RS485 connection interface, and it sends detected data to the other equipment via wireless network compliance LoRaTM wireless communication protocol standards.

    Read moreLoading Done
  • Netvox R718PA7 - Wireless Noise Sensor

    Netvox R718PA7 – Wireless Noise Sensor

    0 out of 5

    The R718PA7 is a wireless communication device that detects the noise. The main unit and the noise sensor communicate via the RS485 connection interface, and
    it sends detected data to the other equipment via wireless network with LoRaTM wireless communication protocol standards.

    Read moreLoading Done
  • Netvox R718PA8-Wireless PH Sensor

    Netvox R718PA8-Wireless PH Sensor

    0 out of 5
    2,210.25د.إ inc. VAT

    R718PA8 is a wireless communication device for pH value of acid, alkali, and salt solution. R718PA8 can detect the pH value and temperature of the solution. The body and the pH sensor are connected through the RS485 interface, and the detected data is transmitted to other devices through the wireless network for display.

    Add to cartLoading Done
  • Netvox R718PA9 - Wireless ORP Sensor

    Netvox R718PA9 – Wireless ORP Sensor

    0 out of 5

    R718PA9 is a wireless communication device for detecting ORP value of acid/ alkali/ salt solution.

    ORP (oxidation reduction potential) is an important indicator of water quality. Although it cannot independently reflect the quality of water, it can integrate other water quality indicators to reflect the ecological environment in the aquarium system.

    Read moreLoading Done
  • Netvox R718PB13 - Wireless Soil Moisture Sensor

    Netvox R718PB13 – Wireless Soil Moisture Sensor

    0 out of 5

    The device is a wireless communication device that detects the moisture content of the soil. It can detect the moisture content of the soil and transmit the detected data to other devices through the wireless network. It uses the SX1276 wireless communication method.

    Read moreLoading Done
  • Netvox R718PB15 - Wireless Soil Moisture, Temperature and Electrical Conductivity Sensor

    Netvox R718PB15 – Wireless Soil Moisture, Temperature and Electrical Conductivity Sensor

    0 out of 5

    The device is a wireless communication device that detects soil temperature and moisture content and soil conductivity, and transmits the detected data to other devices through a wireless network. The SX1276 wireless communication method is adopted .

    Read moreLoading Done
  • Netvox R718PB15A - Wireless Soil Moisture, Temperature, Electrical Conductivity Sensor

    Netvox R718PB15A – Wireless Soil Moisture, Temperature, Electrical Conductivity Sensor

    0 out of 5

    The device is a wireless communication device that detects soil temperature and soil moisture and soil electrical conductivity, and transmits the detected data to other devices through a wireless network. The SX1276 wireless communication method is adopted.

    Read moreLoading Done
  • Netvox R718PE - Wireless Top Mounted Ultrasonic Liquid Level Sensor

    Netvox R718PE – Wireless Top Mounted Ultrasonic Liquid Level Sensor

    0 out of 5

    R718PE is a wireless communication device that uses ultrasound to detect the distance between the device and the detected object. The medium the device detects is the air, so the detected object can be any liquid or solid that has a flat and horizontal surface, water level for example.
    The main body and the sensor of R718PE communicates via the UART serial port, and the detected data can be transmitted via LoRa communication.

    Read moreLoading Done
  • Netvox R718PE01 - Wireless Top-Mounted Ultrasonic Level Sensor

    Netvox R718PE01 – Wireless Top-Mounted Ultrasonic Level Sensor

    0 out of 5

    R718PE01 is a wireless communication device that uses ultrasonic waves to measure
    distance. The ultrasonic transmission medium of R718PE01 ultrasonic sensor is air, so the
    measured object can be any liquid or solid with a certain plane, which can be used for liquid
    level detection, material level detection, etc. The detection angle of R718PE01 is about 20 °,
    which has a stronger transmission signal and is more suitable for the detection of objects such
    as grain heaps and sand.

    Read moreLoading Done
  • Netvox R718PG - Wireless Light Sensor

    Netvox R718PG – Wireless Light Sensor

    0 out of 5
    504د.إ inc. VAT

    The device has a built-in light sensor that can be used for ambient light intensity detection. It adopts the SX1276 wireless communication module. R718PG detects the ambient light intensity value and joins to the gateway.

    Add to cartLoading Done
  • Netvox R718PQ - Wireless Short-Range Occupancy Sensor

    Netvox R718PQ – Wireless Short-Range Occupancy Sensor

    0 out of 5
    619.50د.إ inc. VAT

    The R718PQ is a wireless communication device that detects toilet occupancy. The device has a built-in PIR sensor (pyroelectric human body infrared sensor) to detect whether someone has entered; the detected data is transmitted to other devices through the wireless network, and the SX1276 wireless communication module is used.

    Add to cartLoading Done
  • Netvox R718PQA - Wireless Toilet Occupancy Sensor

    Netvox R718PQA – Wireless Toilet Occupancy Sensor

    0 out of 5

    The R718PQA is a wireless communication device that detects toilet occupancy. The device is equipped with a reed switch sensor for detecting the switch status of the door; a built-in PIR sensor (pyroelectric human body infrared sensor) to detect whether someone is in the toilet. Two detections are established at the same time to determine if the toilet is occupied. Through the wireless network, the detected data is transmitted to other devices for display, which uses the SX1276 wireless communication module.

    Read moreLoading Done
  • R718VA-Wireless Capacitive Proximity Sensor

    Netvox R718VA-Wireless Capacitive Proximity Sensor

    0 out of 5
    651د.إ inc. VAT

    R718VA is a device to detect the status of toilet water, hand sanitizer level, presence or absence of tissue. This device is connected with a non-contact capacitive sensor can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current water level of positions mounted, or the presence or absence of liquid soap or toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module.

    Add to cartLoading Done
  • Netvox R718VB-Wireless Capacitive Proximity Sensor

    Netvox R718VB-Wireless Capacitive Proximity Sensor

    0 out of 5
    651د.إ inc. VAT

    R718VB can detect the toilet water level, hand sanitizer level, presence or absence of toilet paper, it may also be applied to non-metallic pipes (pipe diameter D≥11MM) liquid level detector. This device is connected with a non-contact capacitive sensor which can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current position of liquid level, or the presence or absence of liquid soap, toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module .

    Add to cartLoading Done
  • Netvox R718WA - Wireless Water Leak Detector

    Netvox R718WA – Wireless Water Leak Detector

    0 out of 5

    The device is a LoRaWANâ„¢ device compatible with LoRaWANâ„¢ protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway.

    R718WA carries 1 water leak sensor.

    It uses SX1276 wireless communication module.

    Read moreLoading Done
  • Netvox R718WA2 - Wireless 2-Gang Water Leak Detector

    Netvox R718WA2 – Wireless 2-Gang Water Leak Detector

    0 out of 5

    The device is a LoRaWANâ„¢ device compatible with LoRaWANâ„¢ protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway.
    R718WA2 carries 2 water leak sensors.

    It uses SX1276 wireless communication module.

    Read moreLoading Done
  • Netvox R718WAA - Wireless Water Leakage, Temperature & Humidity Sensor

    Netvox R718WAA – Wireless Water Leakage, Temperature & Humidity Sensor

    0 out of 5

    This device is used for water leakage detection and environmental temperature and humidity detection.
    When the water leakage sensor detects water leakage, it will send an alarm message to the gateway.

    Read moreLoading Done
  • Netvox R718WB - Wireless Water Leak Detector with Rope Sensor

    Netvox R718WB – Wireless Water Leak Detector with Rope Sensor

    0 out of 5

    R718WB is a non-locating leak detection wireless communication device. R718WB can detect the leak status through an external dual-core non-positioning water rope sensor, and send the detected data to data center through the wireless network.

    Read moreLoading Done
  • Netvox R718WB2 - Wireless Water Two Gang Leak Detector with Rope Sensor

    Netvox R718WB2 – Wireless Water Two Gang Leak Detector with Rope Sensor

    0 out of 5

    The device is a LoRaWANâ„¢ device compatible with LoRaWANâ„¢ protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway.

    R718WB2 carries 2 water rope sensors.

    It uses SX1276 wireless communication module.

    Read moreLoading Done
  • Netvox R718WBA - Wireless Temperature and Humidity Sensor & Water Leakage

    Netvox R718WBA – Wireless Temperature and Humidity Sensor & Water Leakage

    0 out of 5

    The R718WBA is a wireless communication device that detects ambient air temperature and humidity and non-locating leak detection. The R718WBA detects the temperature and humidity of the air. At the same time, it detects the presence or absence of water leakage through the 2-core non-locating leak detection sensor line, and transmits the detected data to the gateway through the wireless network. The SX1276 wireless communication module is used.

    Read moreLoading Done
  • Netvox R718X-Wireless Ultrasonic Distance Sensor

    Netvox R718X-Wireless Ultrasonic Distance Sensor

    0 out of 5

    R718X is a wireless device that detect distance by ultrasonic ranging sensor.
    R718X also equips an NTC temperature sensor and will send alarm message while detecting abnormal temperature.

    Read moreLoading Done
  • Netvox R718Y - Wireless Differential Pressure and Temperature Sensor

    Netvox R718Y – Wireless Differential Pressure and Temperature Sensor

    0 out of 5

    R718Y is a wireless communication device which can detect the pressure difference. It will transmit the detected data to other devices for display through the wireless network.

    Read moreLoading Done

End of content

End of content