Smart Home & AV Solutions in UAE – 2000+ Products & Expert Installation. Click Here to Request a Quote Now
Showing 1–24 of 29 results
NFC Enabled
Schedule Switch & Switch Lock
Operating Voltage: 100 ~ 250 VAC, 50 ~ 60 Hz Measurement: Voltage (VAC), Current (mA), Power Factor (%), Power Consumption (kWh), Power (W)
Support Overload Protection
Support Multicast Feature to Control Switches in Bulk
Advanced Features: LoRa D2D Controller & LoRa D2D Agent
Remote on/off, timed on/off
2-Gang
Plug and Play Advanced Features:
Schedule Switch / Button Lock / Overcurrent Protection /Alarm / Multicast / Power Outage Alert NFC Enabled
Socket & Plug Type: UK
Operating Voltage: 100 ~ 250 VAC, 50 ~ 60 Hz
Max Load Capacity: 10 A / 16 A (Optional), 250 VAC
Measurement: Voltage(VAC), Current(A), Power Factor (%), Power Meter (kWh), Power (W)
R718N1 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the solid-core current transformer, which can be conveniently connected to the measuring device.
R718N115 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
R718N125 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
The device is powered by battery and obtains the load AC current value through the current
transformer. The device adopts the clamp-on current transformer, which can be conveniently
connected to the measuring device.
The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
R718N3 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the solid core current transformer, which can be conveniently connected to the measuring device.
R718N315 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested.
R718N325 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.
The NETVOX wireless three-phase current interface which can detect the current can be connected with the different CTs by the user. The device is compatible with the LoRaWAN protocol and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer.
R718N363 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested.
R718N37 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x150A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x250A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x30A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x630A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x75A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x150A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x250A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x630A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
R718NL37 is used to detect three-phase electrical input current and ambient light intensity detection.
It adopts the clamp-on current transformer, which can be conveniently connected tothe measuring device.
R809A is a Wireless Plug-and-Play Power Outlet with Consumption Monitoring for indoor use.
It can remotely control the output switch and detect the output power. It integrates the LoRa/FSK modulation communication wireless module SX1276 which can realize wireless remote control.
R809A has a 10A/230VAC output load capability and is primarily used to measure electrical power consumption and wireless switch control.
End of content
End of content
Be the first to know about our new arrivals, exclusive offers and the latest smart home & AV updates.
By subscribing, you agree to our privacy policy.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
Don't have an account yet? Sign up
Netvox R718IB2 - Wireless 2-Input 0-10V ADC Sampling Interface