Milesight WS301 Magnetic Contact Sensor
1200 mAh Li-SOCL2 Battery
Advanced Features: LoRa D2D Controller
NFC Enabled
1 * LED
Detection Distance:
15 ~ 20 mm
LED:
for Network Status, Open / Close Status
Tamper and Low Battery Indication
Showing 73–96 of 299 results
-
-
Milesight WS502/WS501 Smart Switch
189د.إ inc. VATNFC Enabled
Schedule Switch & Switch Lock
Operating Voltage: 100 ~ 250 VAC, 50 ~ 60 Hz Measurement: Voltage (VAC), Current (mA), Power Factor (%), Power Consumption (kWh), Power (W)
Support Overload Protection
Support Multicast Feature to Control Switches in Bulk
Advanced Features: LoRa D2D Controller & LoRa D2D Agent
Remote on/off, timed on/off
2-Gang -
Milesight WS522 Smart Portable Socket
Plug and Play Advanced Features:
Schedule Switch / Button Lock / Overcurrent Protection /Alarm / Multicast / Power Outage Alert NFC Enabled
Socket & Plug Type: UK
Operating Voltage: 100 ~ 250 VAC, 50 ~ 60 Hz
Max Load Capacity: 10 A / 16 A (Optional), 250 VACMeasurement: Voltage(VAC), Current(A), Power Factor (%), Power Meter (kWh), Power (W)
-
Netvox R211- Wireless IR Blaster
Netvox Wireless IR Blaster can be used for IR learning and application. After IR learning, R211 can send the infrared control signal to corresponded electric devices. R211 can receive infrared signal from other infrared device and process predefined action, ex. controlling other LoRa devices.
-
Netvox R311A – Wireless Door, Window Sensor
R311A is equipped with a reed sensor, which can be used to detect the status of the door and window. Through the built-in wireless module, it can achieve wireless alarm and other functions. It uses the SX1276 wireless communication module.
-
Netvox R311B-Wireless Light Sensor
R311B is a Wireless Light Sensor based on the LoRaWAN open protocol (Class A).
When the illuminance exceeds the set threshold, a report will be sent immediately.
Main -
Netvox R311CA – Wireless Dry Contact Sensor
Netvox wireless dry contact sensors can be used to detect contact between two wired contact points.
It can realize wireless alarm and other functions through built-in wireless module, and is compatible with
LoRaWAN protocol.
It can be easily networked with other related devices. The R311CA is durable and ensures optimum use and is a low
power consumption device. Due to their small size, they can be installed anywhere, they are wireless, so they take up
very little space. -
Netvox R311CB – Wireless Window, Door Sensor and Wireless Glass Sensor
The R311CB device has a built-in reed switch sensor and can be externally connected to the reed switch. It can be used for door and window switch status detection and externally connected to broken glass sensor to detect the glass status. It uses the SX1276 wireless communication module.
-
Netvox R311CC – Wireless 2 – Gang Door/Window Sensor
R311CC is equipped with two external reed switches, which can be used for door and window switch
state detection. The built-in wireless module can realize wireless alarm and other functions, and is
compatible with the LoRaWAN protocol. -
Netvox R311DA – Wireless Vibration Sensor, Rolling Ball Type
When the vibration sensor moves or vibrates, the R311DA can detect vibrations or moving signals and transmit the detected data to other devices through the wireless network.
-
Netvox R311DB-Wireless Vibration Sensor, Spring Type
When the vibration sensor moves or vibrates, the R311DB can detect vibrations or moving signals and transmit the detected data to other devices through the wireless network.
-
Netvox R311FA – Wireless Activity Detection Sensor
It can detect the sudden movement or vibration of the device and send an alarm signal to the gateway for processing. It uses the SX1276 wireless communication module.
-
Netvox R311FA1-Wireless 3-axis Accelerometer Sensor
When the device moves or shakes beyond the set threshold, it immediately reports the current acceleration and velocity of the X, Y, and Z axes.
-
Netvox R311FB – Wireless Activity Event Counter
The device detects the number of movements or vibrations (such as detecting the motor a few times a day), the maximum number of movements or vibrations can reach 2^32 times (theoretical value), and sends the information of the number of movements or vibrations to the gateway for processing. Apply SX1276 wireless communication module.
-
Netvox R311FC – Wireless Activity Timer
The device detects the duration of the movement or vibration (timekeeping) and sends the duration or timing information of the movement or vibration to the gateway for processing. The duration of the movement or vibration can be up to 1000 hours (theoretical value). Apply SX1276 wireless communication module.
-
Netvox R311G -Wireless Light Sensor
R311G built-in photosensitive sensor, can be used for external ambient light intensity detection.R311G is the environmental illuminance automatic detector and the reporter which can send out the environmental illumination report and is a low-power, long range, wireless sensor that can accurately detect environmental illuminance indoor.
-
Netvox R311K – Wireless Tilt Sensor
This device is a tilt detection sensor. When the device (defaults to the vertical direction )
has a tilt of 45 degrees or more in any direction, a tilt signal will be issued. The detected
data is transmitted to other devices through the wireless network. -
Netvox R311LA-Wireless Infrared Proximity Sensor
R311LA is able to detect the existence of the object nearby. It has an infrared proximity sensor that can detect if there is object existing within it detection range and transmits the detected data to Gateway for display via a wireless network; it uses the SX1276 wireless communication module.
-
Netvox R311W – Wireless 2-Gang Water Leak Detector
Wireless 2-Gang Water Leak Detector (R311W) is a LoRaWAN device compatible with LoRaWAN
protocol (ClassA). When the R311W sensor detects the leak, it will send an alarm message to the
gateway. When the sensor detects no leaks, it will send a message that shows no leak to the gateway. -
Netvox R311WA – Wireless Seat Sensor
The NETVOX wireless seat sensor (two way) R311W A is a device that detects the presence of a seat and is compatible with the LoRaWAN protocol. If there is someone on the seat, R311WA will send a message to the gateway. When detecting no one on a sensor seat, it will send an normal status message back to the gateway .
-
Netvox R313A – Wireless Door/Window Sensor
246.75د.إ inc. VATThe device is equipped with a reed sensor, which can be used to detect the status of the door and window. Through the built-in wireless module, it can achieve wireless alarm and other functions. It uses the SX1276 wireless communication module.
-
Netvox R313B – Wireless Light Sensor
278.25د.إ inc. VATThe R313B uses a photosensor. The output current of the photosensor changes in the same direction as the
ambient light intensity changes. By detecting the change in the input level value, the corresponding
illumination intensity is detected. -
Netvox R313CA – Wireless Dry Contact Sensor
R313CA is connected with two external dry contacts for customers to access the device
under test, such as switches, buttons, sensors, relays, reed switches, etc. R313CA can detect the
electrical level change of the device under test. At the same time, it can realize wireless alarm
and other functions through the built-in wireless module -
Netvox R313CC-Wireless 2-Gang Door/Window Sensor
R313CC is equipped with two external reed switches, which can be used for door and window switch
state detection. The built-in wireless module can realize wireless alarm and other functions, and is
compatible with the LoRaWAN protocol.
End of content
End of content